- Stock: In Stock
- Model: SCJ009527
- SKU: SCJ009527
Ask a Question About This Product
- Description
1.5 kW Air Cooled CNC Spindle Motor, 18000 rpm, ER20
Brief
Description
1500W CNC spindle motor for sale at affordable price, 18000 rpm speed, 0.91 Nm torque, 300Hz frequency, 3 phase 380V AC operating voltage, ER20 (φ3.175 mm - φ13 mm) collet.
Feature
- Spindle motor with air cooling fan and ER20 collet ensures smooth running.
- Fast response, strong overload capacity, low noise and high mechanical precision.
- High quality 4 pcs bearings (7005Cx2 + 7002Cx2), runout off less than 0.01mm, tapered bore less than 0.005mm.
- P4 grade ceramic ball bearings used as spindle bearing, which improves the service life under high speed revolution.
- Lubricated with grease, which is resistant to 200 degrees high temperature.
- Tight sealing and two-layer dustproof design.
Application
This series air-cooled electric spindle motors mainly match with variable frequency drives or engraving machines, CNC router machine, and used for high speed profiling, drilling, cutting, engraving and groove milling of wood, metal, plastics, foam, rubber and other materials.
Note: The spindle motor and VFD shall be suitable with each other. The specifications and parameter settings of the VFD shall match the nominal parameters of the spindle motor. Otherwise, it will burn the spindle motor if the settings are not correct.
Specification
| Model | STF47-82-1.5 |
| Matched VFD Model | GK3000-4T0022G (3 hp three phase VFD) GK3000-CS0022 (3 hp 1-phase 220V to 3-phase 380V VFD) |
| Power | 1.5 kW |
| Phase | Three phase |
| Speed | 18000 rpm |
| Voltage | 3-phase 380V±10% AC |
| Current | 3.2A |
| Frequency | 300Hz |
| Torque | 0.91 Nm |
| Number of Pole | 2 poles |
| Cooling Type | Air-cooled |
| Installation Method | Horizontally or Vertically (When the motor is installed, the radial runout standard is required to be within 5um, and the chuck is generally 10um-15um.) |
| Lubrication | Grease |
| Thermal Class | Class F |
| Protection Class | IP50 |
| Certification | CE |
| Warranty | Bearings for half a year, other parts for one year |
| Joint of Nose | ER20 (φ3.175 mm - φ13mm) |
| Bearings Type | 7005C P4*2 & 7002C P4*2 |
| Application | Woodworking & Plastic |
| Weight | 7 kg |
 Download Attachments |
Details
6 Tips of Spindle Motor Maintenance
1. Iron hook shall be commonly used to clean the leaking mouth at the lower end of the water drain cover at the front end of the spindle motor in use, so as to prevent debris from blocking the leaking pipe.
2. The air into the spindle motor should be dry and clean.
3. Remove the CNC spindle from the machine tool and use the air pipe to blow out the residual water in the motorized spindle cooling cavity.
4. Long-term use of the spindle motor should be oil seal, start, in addition to the use of gasoline to wash the surface of anti-rust oil, should do the following work:
A. Pass oil mist for 3-5 minutes. Turn the rotating shaft with your hands and feel no retardation.
B. Use megohm meter to detect the insulation to the ground, usually ≥10 megohm.
C. First run at 1/3 rated speed for 1 hour when the power is switched on. When there is no abnormal phenomenon, run at 1/2 rated speed for 1 hour
D. Precision steel ball is adopted to maintain the turning accuracy of the spindle in high-speed grinding.
5. The CNC spindle motor can be lubricated with high speed grease and oil mist according to different rotating speed.
6. The temperature rise caused by the high-speed rotation of the spindle can be eliminated by using the coolant circulating system flow.
