Metal Bench Lathe Geared Head 1800 RPM 1.5HP (1100W)

Buy Now

Specifications

attribute-list
Max. Swing over Bed	13" (330mm)
Max. Swing over Carriage	8-21/32" (220mm)
Bed Width	6-19/64" (160mm)
Spindle Taper	MT-5
Chuck	6" 3-jaw manual chuck
Distance Between Centers	29-1/2" (750mm)
Longitudinal travel	26-49/64" (680mm)
Cross travel	6-19/64" (160mm)
Number of Spindle Speeds	12
Spindle Bore	1-1/2" (38mm)
Range of Spindle Speeds	60 - 1,800 rpm
Tailstock Quill Diameter	1-17/64" (32mm)
Tailstock Quill Taper	MT-3
Tool Post Travel	3-15/16" (100mm)
Range of Cross Feed	0.0018 - 0.0236 ipr (0.045 - 0.6 mm/r)
Range of Longitudinal Feed	0.0039 - 0.059 ipr (0.1 - 1.5 mm/r)
Tailstock Quill Travel	3-11/32" (85mm)
Tool Size	5/8" × 5/8" (16 × 16 mm)
Number of Inch Threads	23
Range of Inch Threads	9 - 40 TPI
Number of Metric Threads	15
Range of Metric Threads	0.5 - 4 mm
Steady Rest Ability	1-37/64" (40mm)
Follow Rest Ability	1-37/64" (40mm)
AC Power Input	110/220V, 1-phase, 60Hz(Prewired 110V,1-phase, 60Hz)
Rated current	14.4A/110V 7.2A/220V
Spindle Motor	1.5 hp (1.1 kW)

Description

13'' X 30'' Socoje Metal Bench Lathe Geared Head 1800 RPM 1.5HP (1100W) With 6" 3-jaw Chuck With Stand 110V/220V BL330E-1 1set

About this product

1. Metal gear drive head stock for quick change spindle speed

2. All gears in headstock are hardened and precision ground

3. Powerful 1.5 HP AC motor

4. Milling Machine 5-2/5" wide two precision’V’- beds are hardened and ground

5. Benchtop lathe 1.5" diameter spidnle bore with MT5 spindle taper

6. Metal lathe 1.5" diameter spindle bore with MT5 spindle taper

Be deploied 2 axis DRO

Toread the rate of feeding or machining

accurately,2 axis or 3 axis ditial read-out

areavailable. It is deploied with 2 or 3 axis

gratingscale and display in metric/inch

conversion

13'' X 30'' Metal Bench Lathe Geared Head 1800 RPM 1.5HP (1100W) With 6

1.5" Spindle Bore

MT5 spindle nose taper with dig diameter 1-1/2" spindle bore and ground gears in head stock run in oil bath with lo noise.

Hardened two ‘V’ bed

MT5 spindle nose taper with dig diameter 1-1/2" spindle bore and ground gears in head stock run in oil bath with lo noise.

Featured carriage and apron

Full featured carriage and apron assemblies travel smoothly on finely finished bed, providing super accurate and finishes.

Profession compound assembly

T-slotted compound side with 4-stations tool-post, unique and safety handle easy to operate longitudinal and cross feeding.

Tailstock adjustment

Tail stock with V slide for lateral adjustment, adjustable offset by ± 5 mm for taper turning, sleeve and hand wheel.

Steady & follow rest

Also includes fine-making steady rest and follow rest for assistant producing non-standard or long-thin work-piece and high accurate.

The list some rates of spindle speed while machining workpeice for reference only.

Standard Accessories Inludes

Self-centering 3 jaw chuck with reverser jaw & key
Dead center MT3
Change gear
Inner heaxgonal wrenches
Open end wrenches
Tool-post wrench
Oil gun
Screwdriver

Independent Four Jaw Chuck (optional accessories)

Type Bore Max Clamp Max Speed Weight

(mm) (mm) (rpm) (kg)

K72-125 30 57 4200 5

K72-160 55 80 3800 9

K72-200 70 100 2100 15

K72-250 100 130 1800 23

HSS Turning Tool (11pcs./kit (optional accessories)

Size: 10x10mm / 12x12mm / 16x16mm

1. Part-off cutter 7. 90º exter.turning cutter

2. Exter. fine-thread cutter 8. 75º exter. turning cutter

3. 90º exter. turning cutter 9. Left exter. turning cutter

4. 90º end cutter 10. Inter.turning cutter

5. Exter. wide slot cutter 11. Bore-through cutter

6. 45º end cutter

Carbide Insert Tool Holders (9pcs./kit) (optional accessories)

Size: 12x12mm / 16x16mm / 20x20mm / 25x25mm

1. Part-off cutter 6. 45º boring cutter

2. Exter. fine-thread cutter 7. 90º inter.boring cutter

3. 75º exter. turning cutter 8. 75º inter. boring cutterer

4. 45º end cutter 9. Internal fine-thread cutter

5. 90º exter.turning cuuter

Ti Carbide Insert Tool Holders (7pcs./kit (optional accessories)

Size: 12x12mm / 16x16mm / 20x20mm / 25x25mm

1. Part-off cutter 5. 45ºend exter. turning cutter

2. Exter. fine-thread cutter 6. 75ºexter. turning cutter

3. 90º exter. turning cutter 7. Internal fine-thread cutter

4. Left exter. turning cutter

3-Axis Digital Read Out Displayer (optional accessories)

* Precision accurancy * Radius/diameter toggle

* Storatge for 10 tools * mm/inch conversion

* Lower error rate * resolution 0.01/0.005mm

* Dafault coordinates * Operator-specific features

* Increased productively * significant time save

Scales measuring length from 4" -120" are availible as order

Piston Type Quick Change Tool Post (optional accessories)

Type Swing diameter Weight

250-100 300mm(12") 2.23kg

250-200 250-375mm(10-15") 4.00kg

250-300 325-450mm(13-18") 5.72kg

Related Products

Socoje Tools 16in x 40in Gunsmith Lathe with DRO and Quick Change Tool Post - 3Ph

About this product Socoje Tools is known for manufacturing only top-notch metalworking machine tools including metal lathes, milling machines, CNC lat..

from

$6,499.28

Ex Tax:$6,499.28

Socoje Tools 14 inch x 40 inch Gear Head Toolroom Metal Lathe BT1440GQT-3 with 2 inch Bore

About this product 1. Turning capacity: 14-3/16" × 40"2. Spindle bore: 2" (52mm)3. Spindle speed: 70, 115, 190, 300, 460, 755,1255, 2000 RPM4. Working..

from

$5,599.00

Ex Tax:$5,599.00

Socoje Tools 14in x 40in Gear Head Toolroom Metal Lathe With 2 inch Bore Three-Phase BT1440G-3

About this product Socoje Tools is known for manufacturing only top-notch metalworking machine tools including metal lathes, milling machines, CNC lat..

from

$5,591.84

Ex Tax:$5,591.84

Socoje Tools 14 inch x 40 inch Gear Head Metal Lathe BT1440GQTD-3 with 2 inch Bore & DRO

About this product 1. Comes with 2-axis DRO2. Turning capacity: 14-3/16" × 39-3/8"3. Spindle bore: 2" (52mm)4. Spindle speed: 70, 115, 190, 300, 460, ..

from

$7,199.00

Ex Tax:$7,199.00