1500W DC Worm Gear Motor, 36V/48V, 2700rpm
from
$978.32
Ex Tax: $978.32
- Stock: In Stock
- Model: SCJ009269
- SKU: SCJ009269
Products Sold: 0
Product Views: 621
Available Options
Ask a Question About This Product
- Description
1500W DC Worm Gear Motor, 36V/48V, 2700rpm
Brief
Buy 1500 W DC worm gear motor for electric car, renewable energy systems and industrial equipment, works with 2000 rpm high speed and 4.78N·m rated torque, selectable 36V or 48V power supply, gear ratio from 7.5:1 to 100:1.
Description
1500 W (2 hp) 3 phase BLDC motor is equipped with worm gearbox providing high speed and high torque at 36V or 48V power supply. The power, voltage, speed, shaft, motor length and lead can be customized.
Specification
Motor Model | SOCOJED110BLD1500-36A | SOCOJED110BLD1500-48A |
Motor Type | BLDC Motor | |
Power | 1500W | |
Voltage | 36V DC | 48V DC |
Rated Current | 52.08A | 39.06A |
No Load Current | <20A | <15A |
No Load Speed | 2700 rpm | |
Rated Speed | 2000 rpm | |
Rated Torque | 4.78N·m | |
Peak Torque | 14.34N·m | |
Motor Dimension | 110mm | |
Shaft Diameter | 11mm | |
Construction | Permanent Magnet | |
Direction of Rotation | CW/CCW | |
Certificate | CCC, CE, ROSH, LVD, EMC | |
Gear Ratio | 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100 | |
Recommended Drive Model | SCJ009269 | SCJ009269 |
What Parameters of SOCOJE Worm Gear Motors Can Be Customized? | ||
Power | Yes | |
Voltage | Yes | |
Speed | Yes | |
Shaft | Yes | |
Motor Length | Yes | |
Motor Lead | Yes |
Allowable Torque with Gear Head
Gear Ratio | 7.5 | 10 | 15 | 20 | 25 | 30 | 40 | 50 | 60 | 80 | 100 |
Rated Output Speed (rpm) | 267 | 200 | 133 | 100 | 80 | 67 | 50 | 40 | 33 | 25 | 20 |
Rated Output Torque (Nm) | 43.0 | 57.3 | 86.0 | 111.7 | 136.1 | 159.0 | 200.6 | 177.0 | 200.0 | 180.0 | 139.0 |
Note:
- This torque value is the rated output value of the reducer, not the final motor + output torque value T after reducer.
- The formula for calculating the output torque after the final motor + reducer: T = rated torque of the motor * reduction ratio * 0.6, and T≤ rated allowable output torque value of the reducer.
Dimensions (Unit: mm)
Mounting screws are included with gearhead
Speed-Torque Curve
- Instantaneous maximum torque line
The maximum torque momentarily impacts the load when the motor is started.
Beyond this torque, the over-current protection of the driver will cause the motor to stop. - Short time operation area
The motor can run at a short time within this torque range at different speeds.
If the operation time is too long, the motor will generate heat, which may cause the motor to stop or burn. - Rated operating torque line
The rated torque of motor running at different speeds, and the motor can run for a long time at this torque. - Continuous operating area
When the motor rotates at different speeds, it runs continuously in this corresponding zone.
Details
Tips: How to prevent the generation of brush sparks in a worm gear motor
- The commutation pole can be installed, which is offset by the potential of the commutation pole.
- The brush should be selected reasonably, the contact resistance between the brush and the surface of the commutator should be as large as possible, and the wear resistance of the brush should be good.
- The pressure of the brush should be adjusted well. If the pressure is too tight, it will aggravate the wear of the brush and commutator. However, if the pressure is too loose, the contact between the brush and the commutator will be poor, which will cause some problems. The inner surface of the brush holder box should be smooth and flat, without burrs and other problems, and the inner hole roughness should be less than 2um.
- The material and model of the brush should be choosen correctly, which is generally determined according to the operating conditions of the generator.
- The number of positive and negative brushes should be equal, and during the installation process, the brush distance between the brushes should be equal, and the contact between the brushes and the collector ring should be good.
- Reviews