60 kg·cm (6 Nm) micro RC Servo Motor, 6V/ 7.4V
from
$299.99
Ex Tax: $299.99
- Stock: In Stock
- Model: SCJ009220
- SKU: SCJ009220
Products Sold: 0
Product Views: 499
Ask a Question About This Product
- Description
60 kg·cm (6 Nm) RC Servo Motor, 6V/ 7.4V
Brief
Cheap micro RC servo motor with 60 kg·cm (6 Nm) high torque, 6V and 7.4V operating voltage available. This radio control servo motor is a core motor designed with 2 ball bearings and metal gear, best for RC planes, submarines and remote-controlled robots.
Description
Micro radio control servo motor with compact size, is widely used for monitoring equipment, stage lighting and other steering equipment.
Features
- Micro RC servo motor’s all-aluminum alloy shell has good thermal conductivity, and it is easier to mold with CNC processing and has a higher degree of precision. Through the anodized shell, the corrosion resistance of aluminum is further improved.
- The thickened all-steel teeth have higher strength and longer life. With the all-aluminum shell, the comprehensive mechanical properties are effectively improved.
- The hollow cup is used as the power source, which has no iron core, low rotor inductance, good responsiveness, high efficiency, small size and easy to obtain large torque.
Specification
| Model | SCJ009220 | ||
| Electrical Specification | Operating Voltage | 6V | 7.4V |
| Idle Current (at Stopped) | 5mA | 6mA | |
| No Load Speed | 0.15sec/60° | 0.13sec/60° | |
| Running Current (No Load) | 190mA | 250mA | |
| Stall Torque | 48 kg·cm (4.7 Nm) | 62 kg·cm (6 Nm) | |
| Stall Current | 2400mA | 2900A | |
| Mechanical Specification | Size | 65.8*30*59.75mm | |
| Limit Angle | No Limit | ||
| Case Material | Engineering Plastic & Aluminum | ||
| Gear Material | Metal Gear | ||
| Bearing Type | 2 Ball Bearings | ||
| Connector Wire | 150mm ± 5mm | ||
| Weight | 200g | ||
| Horn Type | 15T, Plastic, POM | ||
| Motor | Core Motor | ||
| Storage Temperature Range | -30℃ ~ 80℃ | ||
| Operating Temperature Range | -15℃ ~ 70℃ | ||
| Temperature Range | 25℃ ± 5 ℃ | ||
| Humidity Range | 65% ± 10% | ||
| Certificate | EMC, ROHS | ||
| Control Specification | Command Signal | Bus Packet Communication TTL Level | |
| Amplifier Type | Half Duplex Asynchronous Serial Communication | ||
| Pulse Width Range | 0-253 | ||
| Neutral Position | 338400bps ~ 1 Mbps | ||
| Running Degree | 300° (when 0 ~ 1023) | ||
| Dead Band Width | Load, Speed, Input Voltage | ||
| Rotating Direction | Potentiometer (300° / 1024) | ||
Dimensions (Units: mm)
Details
Tips: Difference between digital RC servo motor and analog RC servo motor
- Different method of processing the input signal. Digital micro RC servo motor is mainly composed of a motor, a reduction gear, a control circuit, etc., and it can be maintained at a certain position by sending a PWM signal only once. The analog RC servo motor is the same as the traditional RC servo motor. It needs to send PWM signals multiple times to be able to keep it at the specified position, realize the control of the steering gear, and rotate according to the specified speed.
- Different control circuit. The control circuit of the digital RC servo motor has more microprocessors and crystal oscillators than the analog RC servo motor, therefore, the processing methods of the control circuit are different between the two, and the performance of the digital RC servo motor is also different from that of the analog RC servo motor.
- Different reaction speed. The analog RC servo motor needs a short power pulse followed by a long pause, so it cannot give the motor too much excitation to make it rotate. Digital RC servo motor is a steering gear that appeared in the new era, so digital has an advantage over analog RC servo motor in terms of response speed. Because the digital RC servo motor has a microprocessor, all can process the input signal according to the set parameters before the power pulse is generated to the motor.
