- Stock: In Stock
- Model: SCJ006836
- SKU: SCJ006836
Ask a Question About This Product
- Description
3 In 1 NC Servo Straightener Feeder W/Uncoiler with shearing Machine
Save Looping Space, Increase Safety Coiled material is from uncoiler through both left and right free guide rollers with advance photo sensors keeps looping. Through the opener device and bending roller system feeding the coiled material from up to down, passing opener device, coil tip flatness device, pinch rollers, work rollers, feed rollers to make the coiled material passing in an excellent smooth feeding
STANDARD ACCESSORY
1. Acluster gear set maximizes transmissions of horsepower
2. Outgoing catenary to assist and support the material
3. Feed and Straightener rolls with a hard chrome finished
4. Feeding line easily adjusts by advance worm gear screw jacks device
5. Straightener adjusts by advance worm gear screw jacks device
6. Left/right swing tension roll support device
7. Reference indicator adjsuter
8. Coil material entry support assembly
9. Straightener opener device
10. Hold down arm device
11. Transformer
12. PLC Control Feeding program from mitusbishi
OPTION
1. Coil car
2. Shearing device
| Basic parameters | ||||
| Name | Uncoiler, straightener, NC servo roll feeder, 3 in 1 | |||
| Model | NCBF-600B | |||
| Width of the material | 50mm~800mm | |||
| Thickness of the material | 0.4mm~4.5mm | |||
| Straightening capacity (σs≤250MPa) |
| |||
| Inside coil diameter | Φ460mm~Φ530mm | |||
| Max.coil outside diameter | Φ1400mm | |||
| Max.coil weight | 5T | |||
| Straightening roll diameter | Φ76mm×7(upper*4/lower*3) | |||
| Material of straightening roll | GCr15(HRC58-62) | |||
| Feeding roll diameter | Φ84mm | |||
| Uncoiler power | 2.2Kw | |||
| Straightening power | 4.4Kw | |||
| Feeding speed | 0~20m/min | |||
| Feed pitch Accurary | <±0.2mm | |||
| Other configuration | ||||
| Straightening adjustment type | Eccentric shaft adjust by worm and gear | |||
| Load material type | coil car | |||
| Feeding line adjust | Electric | |||
| Hold down arm device | By pneumatic | |||
| Auto threading table device | By hydraulic | |||
| Coil keeper adjust width | Manual | |||
| Front coil keeper adjust open | Pneumatic | |||
| Coil width guide at the straightener | Two hand-wheel adjusted | |||
| Coil tip de-bender device | Hydraulic | |||
| Operation control mode | Main control cabinet + action unit remote control switch | |||
| Coil end detect sensor | With | |||
| Purchased parts brand | ||||
| Main bearing | HRB,ZWZ | |||
| Servo motor | Japan YASKAWA(SGMGH) | |||
| Man-machine interface | Taiwan WEINVIEW(Colored) | |||
| Common motor | Taiwan Wanxin | |||
| Frequency changer | Taiwan DELTA | |||
| Pneumatic unit | Taiwan Airtac | |||
| PLC | Japan Mitsubishi | |||
| Relay | Japan Omron | |||
| Hydraulic fittings | Beijing HUADE | |||
| Other technical data | ||||
| Pneumatic pressure | 0.5Mpa | |||
| Hydraulic pressure | 7Mpa | |||
| Voltage | 3phase 380V | |||
| Feed Leveler from floor | 1050mm-1250mm | |||
| Input material type | From down to up | |||
| Standard direction | From left to right | |||
| Equipment length(Not included outlet shelf) | ≈4.5m |
Shearing Machine
Please provide your material spefication, and max. cut to length, we will suggest different shearing machne as your request.
