- Stock: In Stock
- Model: SCJ004405
- SKU: SCJ004405
Ask a Question About This Product
- Description
1. WBL290F bench lathe is a specially designed machine with an outstanding value and able to take on light duty jobs requiring a 11" swing, 1-1/2" (38mm) spindle bore and 29" between centers.
2. The Primary purpose of WBL290F is to make concentric cuts in metal stock. With the lathe, round stock can be made perfectly concentric, threaded, drilled, knurled, bored, tapered, etc.
3. Real inch leadscrew and all feed screws for even, easy measurements. No need metric conversions
4. D1-4 camlock spindle make swapping chucks a lot easier, more precision
5. Large 1-1/2" spindle bore
6. Power cross feed is available
7. Piston Type Quick Change Tool Post set included
8. Super smooth and quiet running machine
9. factory provides reliable quality, in time service and fast technical support
Model No. WBL290F
· Distance between centers: 29"
· Swing over bed: 11-1/2"
· Swing over cross slide: 6-3/4"
· Bed width: 7"
· Spindle bore: 1-1/2"
· Spindle nose: D1-4
· Spindle taper: MT#5
· Spindle speeds: 50-1800 RPM (Variable)
· Range of cross feeds: 0.0015-0.0056"/rev.
· Range of longitudinal feeds: 0.0025-0.012"/rev.
· Inch thread range: (21) 8–56 TPI
· Metric thread range: (12) 0.4–3.mm
· Cross slide travel: 6-3/4"
· Compound rest travel: 3-3/4"
· Tailstock taper: MT#3
· Tailstock quill diameter: 1-1/4"
· Tailstock quill travel: 3-1/8"
· Motor type: Brushless, 2HP
· Power supply: 110V/1Ph/60Hz
· Rated current: 15A
· Packing size: 59" W × 29-1/2" D × 29" H
· Approx. shipping weight: 590 lbs.
STANDARD EQUIPMENT:
· 6" D type directly mounted 3-jaw chuck with two sets of jaws
· Steady rest
· Follow rest
· Face plate
· 250-111 Piston type quick change tool post with 4 holders
· Chuck guard
· Splash guard & oil tray
· Replacement fuse
· MT#3 living center
· MT#3 dead centers and MT3/MT5 center sleeve
· Tool box with service tools
New updated features with steady rest, follow rest, face plate, MT3 live center, metal oil gun & metal toolbox
Big Bore Spindle with MT#5 Taper
· WBL290F is equipped with standard D1-4 Camlock Spindle which is dynamically balanced, harened and precision ground
· Spindle is supported by high precision, Class 5, adjustable tapered roller bearings
· Large 1-1/2" spindle bore
Electronic Driving System
· WBL290F has 2HP POWERFUL brushless motor with silent running
· High quality electronics used throughout machine for long term reliability
· Braking resistors increase the stability of the electrical system
· Brushless motors has high efficiency, low noise (quiet), smooth operation, long life, low maintenance costs. Especially with low energy consumption brings better economic benefits to users
7" Heavy Duty Bed
· Heavy duty bed with 7" width same as most 12"x36" lathe
· Guideway induction hardened and precision ground for long life
Change Gears
· WBL290F change gears cover is equipped with protective QKS8 door swtich
· WBL290F change gears are all metal gears , can provides 21 kinds of inch threads and 12 kinds of metric threads cutting
· WBL290F gearbox provides both right and left hand threading
· Gearbox provides 3 kinds of feeding speeds
· Separate leadscrew and feed rod
Gearbox
Apron
· WBL290F apron can provide power cross & longitudinal feed
· Feed rod with clutch system and micrometer carriage stop provide more pretection
· Feed rod resistance power can be adjusted by the clutch
Carriage Stop
Tailstock
· WBL290F tailstock with quick lock handle
· Tailstock lock system features a drive hub to ensure consistent draw-down alignment every time
6" D type 3-Jaw Self-centering Chuck
Piston Type quick change tool post 1x250-100, 3x250-101&1x250-102
