- Stock: In Stock
- Model: SCJ006723
- SKU: SCJ006723
Ask a Question About This Product
- Description
| Air Feeder | |||||
| I. Features | |||||
| 1. The machine can feed soft material | |||||
| 2.The machine feed material by single loop way, with high veracity and high speed | |||||
| 3.The machine whole body have been process under oxidation, anti-hot, anti-cauterization | |||||
| 4.New style square body, can adjust the back stand idler pulley freely | |||||
| II. Technical paramter | |||||
| Model | Coil Width | Strip Thickness | Sheet Length | Air Pressure | Max Feeding S.P.M |
| mm | mm | mm | kg/cm2 | MC/min | |
| AF-1C | 50 | 0.5 | 50 | 4.5 | 250 |
| AF-2C | 65 | 0.8 | 80 | 4.5 | 200 |
| AF-3C | 80 | 1.2 | 80 | 4.5 | 180 |
| AF-4C | 100 | 1.5 | 130 | 4.5 | 130 |
| AF-5C | 150 | 2 | 150 | 4.5 | 100 |
| AF-6C | 200 | 2 | 200 | 4.5 | 70 |
| AF-7C | 250 | 2.5 | 250 | 4.5 | 50 |
| AF-8C | 300 | 2.5 | 300 | 4.5 | 45 |
| AF-9C | 350 | 3 | 350 | 4.5 | 35 |
| AF-10C | 400 | 3 | 400 | 4.5 | 30 |
| AF-11C | 450 | 3 | 450 | 4.5 | 25 |
· Main process
1 1. The central hole of the main structure is by grinding firstly then electroplating , so as to better ensure its roundness and straightness, which thus enable the core shaft to run smoothly.
1 2. After processed, the main structure goes through anti-corrosive treatment, and then it is cleaned through ultrasonic wave before assembled so as to guarantee trouble-free when processing leftover materials.
1 3. The guiding rail is processed through hard chrome plating finish after going high tensile steel heating process. The connection between mobile part and guiding rail goes through accurate grinding so as to make machine moving and its motion flexible and stable.
· Fittings
1 1. Replaceable directional valve adopts large rounded corner structure,the inner hole is polished by mirror, which greatly improves the feeding speed of feeder and the service life of the sealing ring.
1 2. Adopting two sets of pneumatic buffers,it can automatically absorb the inertial impact in the process of using the air feeder, effectively reducing the vibration and n o ise.
1 3. All screws are installed with high strength press oxygen adhesive , so that they will not be loosened by the shock o of long time use, and can achieve a good sealing effect.
·E type solenoid valve standard model
Suitable for short stroke of press machine, or too long feeding length.
·R type solenoid valve standard model
For high precision feeding, use electromagnetism valve to slack fixed clamp to correct error.
· Left and right zigzag style
Suitable for various forms of parts processing, can save more than 1/2 of the material. The support adopts direct bearing, cooperates with the circular rod slide, no noise, high wear resistance, light load, rapid displacement, and shorten the feeding time. Choose feeding time by electronic control. Simple operation, easy maintenance, high accuracy.
AF-5C 60 Ton Press Aluminium Cut To Length Line Strip Coiling Air Metal Slitter Nc Abrasion Machine
