Metal Cutting Press Auto Feeding Device With Straightener And Uncoiling Feeder Machine
from
$48,000.00
Ex Tax: $48,000.00
5 or more $46,000.00
- Stock: In Stock
- Model: SCJ006874
- SKU: SCJ006874
Products Sold: 0
Product Views: 94
Ask a Question About This Product
- Description
Product Description
| Basic parameters | |
| Model | NCLF-600B |
| Width of the material | 70mm~600mm |
| Thickness of the material | 2.0mm~8.0mm |
| Inside coil diameter | Φ460mm~Φ530mm |
| Max.coil outside diameter | Φ1600mm |
| Max.coil weight | 5 ton |
| Straightening roll diameter | Φ120mm×7(upper*4/lower*3) |
| Material of straightening roll | GCr15(HRC58-62) |
| Feeding roll diameter | Φ136mm |
| Decoiler power | 5.5Kw |
| Straightening power | 11Kw |
| Feeding speed | 0~20m/min |
| Feed Pitch accuracy | <±0.2mm |
| Other configuration | |
| Straightening adjustment type | Eccentric shaft adjust by worm and gear |
| Load material type | coil car |
| Feeding line adjust | Electric |
| Hold down arm device | By pneumatic |
| Auto threading table device | By hydraulic |
| Coil keeper adjust width | Manual |
| Front coil keeper adjust open | Pneumatic |
| Coil width guide at the straightener | Two hand-wheel adjusted |
| Coil tip de-bender device | Hydraulic |
| Operation control mode | Main control cabinet + action unit remote control switch |
| Coil end detect sensor | With |
| Other technical data | |
| Operating air | 0.5Mpa |
| Operating hydraulic | 7Mpa |
| voltage | 3phase 380V |
| Feed Level from floor | 1100mm-1300mm |
| Input material type | From down to up |
| Delivery side | From left to right |
| Equipment length(Not included outlet shelf) | ≈5.0m |
STANDARD ACCESSORY
1. Electric eye loop control system
2. Outgoing catenary to assist and support the material
3. Feed and Straightener rolls with a hard chrome finished
4. Feeding line easily adjusts by advance worm gear screw jacks device
5. Straightener adjusts by advance worm gear screw jacks device
6. Left/right swing tension roll support device
7. Reference indicator adjsuter
8. Coil material entry support assembly
9. Straightener opener device
10. Hold down arm device
11. A cluster gear set maximizes transmission of horsepower
12. Transformer
13. PLC Control Feeding program from mitusbishi
OPTION
1. Coil car
2. Shearing machine
