- Stock: In Stock
- Model: SCJ009274
- SKU: SCJ009274
Ask a Question About This Product
- Description
150W DC Gear Motor, 3000 rpm, 12V/24V/48V
Brief
Description
Best quality DC brushless motor with gear head, 150W rated power and 3000 rpm speed, rated torque is 0.48 Nm, designed to operate with 12V, 24V, 48V. This affordable DC gear motor is generaly used in various industrial applications like food packing machine, robotics medical, instruments etc..
150W DC gear motor specifications
| Model | SCJ009274 | SOCOJED5BLD150-24 | SOCOJED5BLD150-48 |
| Power | 150W | 150W | 150W |
| Voltage | 12V | 24V | 48V |
| Rated Speed | 3000 rpm | 3000 rpm | 3000 rpm |
| No-load Speed | 3300 rpm | 3300 rpm | 3300 rpm |
| Rated Current | 15.63A | 7.81A | 3.91A |
| Rated Torque | 0.48 N.m | 0.48 N.m | 0.48 N.m |
| Peak Torque | 1.43 N.m | 1.43 N.m | 1.43 N.m |
| No-load Current | < 5.2A | < 3.13A | < 1.61A |
| Compatible Driver Model | BLD-30A | BLD-300B (Click it to the product page) | |
| Weight | 3 Kg | ||
| Protection Grade | IP54 | ||
| Motor Lead Length | 300mm | ||
| Temperature | 0~50℃ | ||
| Gearbox Model | 5GN□K, Enter the gear ratio into the box (□) within the model name | ||
| Gear Ratio | 3, 5, 7.5, 10, 12.5, 15, 18, 20, 25, 30, 36, 40, 50, 60, 75, 90, 100, 120, 150, 180, 200 | ||
Note: Motor length, power, voltage and speed can be customized according to your requirements under the allowed circumstance of adoptable dimension.
The allowable torque with a gearbox
| Gear Ratio | 3 | 5 | 7.5 | 10 | 12.5 | 15 | 18 | 20 | 25 | 30 | 36 | 40 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 | 200 |
| Speed (r/min) | 1000 | 600 | 400 | 300 | 240 | 200 | 167 | 150 | 120 | 100 | 83.33 | 75 | 60 | 50 | 40 | 33 | 30 | 25 | 20 | 17 | 15 |
| Allowable Torque (N.m) | 1.16 | 1.93 | 2.9 | 3.87 | 4.36 | 5.23 | 6.27 | 6.3 | 7.88 | 9.46 | 11.35 | 12.61 | 15.76 | 18.91 | 20 | 20 | 20 | 20 | 20 | 20 | 20 |
| Allowable Torque (kgf.cm) | 11.6 | 19.34 | 29.01 | 38.68 | 43.57 | 52.29 | 62.74 | 63.03 | 78.79 | 94.55 | 113.5 | 126.1 | 157.6 | 189.1 | 200 | 200 | 200 | 200 | 200 | 200 | 200 |
Note:
- The values colored "Red" indicate that the gearbox and the DC motor are running in the same direction, and the other values are in the opposite direction.
- When it is desired to reduce the speed further than the gear ratio in the table above, an intermediate speed reducer with a gear ratio of 10 can be installed between the motor and the gearbox.
Wiring Definition
Dimension (Unit: mm)
*Mounting screws are included with gearbox
Details
Tips: How long should the gear motor replace the engine oil?
The gear motor shall replace the engine oil for the first time after operating 200~300 hours, the oil quality shall be regularly inspected in following use. If any impurity or deteriorated oil is mixed in, the engine oil shall be replaced. Generally, the gear motor that continuously works for long term shall replace its engine oil every 5000 hours or every year, the gear motor that has stopped for a long term shall replace its engine oil before starting again.
When replacing the engine oil, we shall note that the same oil shall be added into the gear motor, it’s not allowed to mix the oil in different brands, however, the oil in same brand but different viscosity is allowed. When replacing the engine oil, the gear motor shall be cooled down till there's no burning danger, however, the gear motor shall be warm because the oil viscosity increases in fully cool, oil discharge will be difficult.
