100 W DC Worm Gear Motor, 12V/24V/48V 2000 rpm
from
$484.27
Ex Tax: $484.27
- Stock: In Stock
- Model: SCJ009261
- SKU: SCJ009261
Products Sold: 0
Product Views: 512
Ask a Question About This Product
- Description
100 W DC Worm Gear Motor, 12V/24V/48V
Brief
100 W DC worm gear motor for sale at economical price, it is a 3 phase brushless motor and worm gearbox providing high torque and high efficiency at 12V, 24V, 36V or 48V, 2000 rpm rated speed, rated torque at 0.32N·m and peak torque at 0.96N·m, gear ratio from 7.5:1 to 80:1.
Description
100 W DC worm gear motor works at 2000 rpm rated speed, choosing gear ratio from 7.5:1 to 80:1. Worm gearbox drives BLDC motor with high torque and low noise at 12V, 24V, 36V or 48V.
Specification
| Motor Model | SOCOJED2BLD100-12A | SOCOJED2BLD100-24A | SOCOJED2BLD100-36A | SOCOJED2BLD100-48A |
| Motor Type | BLDC Motor | |||
| Power | 100W | |||
| Voltage | 12V DC | 24V DC | 36V DC | 48V DC |
| Rated Current | 10.42A | 5.21A | 3.47A | 2.60A |
| No Load Current | ＜1.2A | ＜0.8A | ＜0.6A | ＜0.4A |
| No Load Speed | 2800 rpm | |||
| Rated Speed | 2000 rpm | |||
| Rated Torque | 0.32N·m | |||
| Peak Torque | 0.96N·m | |||
| Motor Dimension | 57mm | |||
| Shaft Diameter | 11mm | |||
| Construction | Permanent Magnet | |||
| Direction of Rotation | CW/CCW | |||
| Certificate | CCC, CE, ROSH, LVD, EMC | |||
| Gear Ratio | 7.5, 10, 15, 20, 30, 40, 50, 60 | |||
| Recommended Drive Model | SCJ009261 | SCJ009261 | SCJ009261 | SCJ009261 |
| What Parameters of SOCOJE Worm Gear Motors Can Be Customized? | ||||
| Power | Yes | |||
| Voltage | Yes | |||
| Speed | Yes | |||
| Shaft | Yes | |||
| Motor Length | Yes | |||
| Motor Lead | Yes | |||
Allowable Torque with Gear Head
| Gear Ratio | 7.5 | 10 | 15 | 20 | 25 | 30 | 40 | 50 | 60 | 80 |
| Rated Output Speed (rpm) | 267 | 200 | 133 | 100 | 80 | 67 | 50 | 40 | 33 | 25 |
| Rated Output Torque (Nm) | 2.9 | 3.8 | 5.7 | 7.4 | 9.1 | 10.6 | 13.4 | 12 | 17 | 12 |
Note:
- This torque value is the rated output value of the reducer, not the final motor + output torque value T after reducer.
- The formula for calculating the output torque after the final motor + reducer: T = rated torque of the motor * reduction ratio * 0.6, and T≤ rated allowable output torque value of the reducer.
Dimensions (Unit: mm)
Mounting screws are included with gearhead
Speed-Torque Curve
- Instantaneous maximum torque line
The maximum torque momentarily impacts the load when the motor is started.
Beyond this torque, the over-current protection of the driver will cause the motor to stop. - Short time operation area
The motor can run at a short time within this torque range at different speeds.
If the operation time is too long, the motor will generate heat, which may cause the motor to stop or burn. - Rated operating torque line
The rated torque of motor running at different speeds, and the motor can run for a long time at this torque. - Continuous operating area
When the motor rotates at different speeds, it runs continuously in this corresponding zone.
Details
Tips: How to maintain the DC worm gear motor?
- Don't hammer the worm gear motor housing by gravity to avoid damage.
- Regularly check whether the installation foundation, seals, drive shaft, etc. are normal. If an abnormal phenomenon occurs, stop the machine immediately for inspection and troubleshoot.
- Try to avoid direct sunlight and harsh conditions for the worm gear motor.
- Good ventilation should be provided to ensure the normal heat dissipation of the worm gear motor.
- Use recommended lubricating oil.
The above methods can extend the life span of the worm gear motor to a certain extent.
