- Stock: In Stock
- Model: SCJ009399
- SKU: SCJ009399
Ask a Question About This Product
- Description
High Torque Nema 23 Stepper Motor, 3A, 1.8 degree, 4 wires
Brief
Description
Nema 23 Stepper motor, 2.2Nm in 82mm, 1.8 degree.
Specification
| Electrical Specification | Model | SOCOJE57STH82-3004 |
| Matched Driver Model | SCJ009399(Click it to see more info) | |
| Step Angle | 1.8° | |
| Holding Torque | 2.2Nm | |
| Rated Current/phase | 3.0A | |
| Phase Resistance | 1.2Ω | |
| Inductance | 4mH | |
| Rotor Inertia | 600g-cm2 | |
| Physical Specification | Frame Size | 57 x 57mm |
| Length | 82mm | |
| Shaft Diameter | Φ6.35mm | |
| Shaft Length | 19mm | |
| Motor Leads | 4 | |
| Weight | 1.2kg | |
| Technical Parameters | Step Angle Accuracy | ±5% (full step, no load) |
| Resistance Accuracy | ±10% | |
| Inductance Accuracy | ±20% | |
| Temperature Rise | 80℃ Max. (rated current, 2 phase on) | |
| Ambient Temperature | -20℃~+50℃ | |
| Insulation Resistance | 100MΩ Min. 500VDC | |
| Dielectric Strength | 500V AC for one minute | |
| Shaft Radial Play | 0.02Max. 450g | |
| Shaft Axial Play | 0.08Max. 450g | |
| Quality Assurance | Warranty Period | 12 months |
| Certificate | CE, ROHs, ISO/SGS9001 |
Nema 23 Stepper Motor Dimensions: (Unit=mm)
L Max=82mm
Nema 23 Stepper Motor Wiring Diagram
Tips: Application of stepper motor in transverse sealing
As for the continuous packing machine, transverse sealing is an important actuator and also one of complicated mechanism of packaging machine. For the packing film with color mark, there is strict requirement for its seal and cut-off position. To improve the cut-off accuracy, eccentric chain wheel mechanism and crank shaft guide mechanism have developed in succession. However, there are many disadvantages over these mechanisms, like difficult in adjustment and low reliability. However, the main reason for these disadvantages is constant speed transverse sealing of transversely sealed wheel and positioning off according to the technological requirement.
Speed synchronization can be realized for the stepper motor direct transverse seal wheel. Film feed wheel of continuous packing machine feed films continuously. During the transverse sealing, the linear speed of transverse sealing is required to be synchronized with the speed of film feed to avoid tearing film and thin film. When the bag length is changed, it is necessary to change it by changing the rotational velocity of the transverse sealing wheel, but it takes certain time to realize transverse sealing. That is, it takes constant time to seal it transversely, contact and leave it, or it will not sealed tightly. The total time for the transverse sealing wheel to rotate for a circle and that for transverse sealing is constant. To satisfy the requirements for speed synchronization, the rotational speed of the stepper motor within one circle can be divided into two parts: firstly satisfying the requirements of speed synchronization and satisfying the requirements of non-load part for rotating for one circle.
