- Stock: In Stock
- Model: SCJ009349
- SKU: SCJ009349
Ask a Question About This Product
- Description
High Torque Nema 42 Stepper motor, 6A, 1.2 degree, 3 phase
Brief
Description
The 6A, 3 phase NEMA 42 stepper motor is a 6-wire stepper motor which has 1.2° per step for smooth motion and a nice holding torque.
Specifications
| Basics | Model | SOCOJE3200-6006A |
| Matched the Driver Model | SCJ009349 (Click it to see more info) | |
| Step Angle | 1.2° | |
| Length | 200mm | |
| Weight | 11.8kg | |
| Current | 6A | |
| Resistance | 1.7Ω | |
| Holding Torque | 28Nm | |
| Motor Leads | 6 | |
| Rotor Inertia | 15000g-cm2 | |
| Technical parameters | Step Angle Accuracy | ±5% (full step, no load) |
| Resistance Accuracy | ±10% | |
| Inductance Accuracy | ±20% | |
| Temperature Rise | 80℃Max. (rated current, 2 phase on) | |
| Ambient Temperature | -10℃~+50℃ | |
| Insulation Resistance | 100MΩ Min. 500VDC | |
| Dielectric Strength | 1Min. 500VAC·5mA | |
| Shaft Radial Play | 0.06Max. 450g | |
| Shaft Axial Play | 0.08Max. 450g |
Dimension
Wiring Diagram
Tips: Differences between unipolar and bipolar stepper motors
Bipolar stepper motor indicates the stepper motor with 2 coils and 4 lines. The current can flow in forward and reverse direction in two coils, so called bipolarity.
Unipolar stepper motor indicates the stepper motor with 2 coils and 5 or 6 lines. That is, one tap is increased in the middle of one coil. 5 lines can be seen as 6 ones. The two intermediate line of two coils can be connected. For there is tap in the middle of one coil, the current can flow towards different direction along the half way in one coil, but half of the motor coil is just used.
Bipolar motor features high application efficiency for the current flows in the forward and reverse directions of one coil. As for the unipolar stepper motor, the efficiency is low for half of coil is just used with most of the time. However, in terms of strict cost requirement, the unipolar motor is widely applied.
