Hydraulic Orbital Motor, 100cc/rev, 15 MPa Low speed and high torque
from
$209.99
Ex Tax: $209.99
- Stock: In Stock
- Model: SCJ009557
- SKU: SCJ009557
Products Sold: 0
Product Views: 286
Ask a Question About This Product
- Description
Hydraulic Orbital Motor, 100cc/rev, low speed high torque
Brief
Low speed high torque hydraulic orbital motor for sale. It is a spool valve motor with 100cc/r displacement, reliable operation and high efficiency. Shaft seal can bear high pressure of back. This orbit motor can be used in parallel or series in the hydraulic system.
Description
Factory price hydraulic orbital motor with high performance shaft, can bear high pressure, high speed and high radial force. Mounting flanges of 2 bolts and 4 bolts, easy to install.
Specification
| Model | SCJ009557 | |
| Shaft Type (Optional) | Flat Key, Splined | |
| Flange Type (Optional) | 2 Bolts, 4 Bolts | |
| Displacement | 100 cc/rev (100 cm3/rev) | |
| Working Pressure | 15 MPa | |
| Flow | Continuous | 57 LPM |
| Intermittent | 68 LPM | |
| Max.Speed | Continuous | 558 rpm |
| Intermittent | 669 rpm | |
| Pressure | Continuous | 124 ∆Bar |
| Intermittent | 138 ∆Bar | |
| Torque | Continuous | 154 Nm |
| Intermittent | 173 Nm | |
| Weight | 7kg | |
Note:
- A simultaneous maximum torque and maximum speed is not recommended.
- ∆Bar refers to true pressure difference between inlet port and outlet port.
- Continuous Rating means that the motor may be run continuously at these ratings.
- Intermittent operation refers to that the motor running time must not exceed 10% per minute under this condition.
*To assure best orbital motor life, run it for approximately one hour at 30% of rated pressure before application to full load. Be sure this motor is filled with fluid prior to any load applications.
Dimensions (Unit: mm)
L1=149mm
Hydraulic Orbital Motor Shaft (Unit: mm)
Flange Types (Unit: mm)
L=156mm
Details
Tips: Advantages of hydraulic orbital motors
The hydraulic orbital motor is a small, low-speed, high-torque hydraulic motor with a stator and rotor pair with one-shaft distribution and inserts. The advantages are as follows:
- The orbit motor is small in size and light in weight, and its dimensions are much smaller than other types of hydraulic motors with the same torque.
- Wide speed range, stepless speed regulation, minimum stable speed up to 15 rpm, convenient installation and arrangement, low investment cost.
- It can be used in series or in parallel in the hydraulic system.
- The rotation inertia is small, easy to start under load, both forward and reverse rotation can be used, and there is no need to stop when commutation.
