Hydraulic Orbital Motor, 125cc/rev, low speed high torque
from
$219.75
Ex Tax: $219.75
- Stock: In Stock
- Model: SCJ009558
- SKU: SCJ009558
Products Sold: 0
Product Views: 306
Ask a Question About This Product
- Description
Hydraulic Orbital Motor, 125cc/rev, low speed high torque
Brief
Factory price hydraulic orbital motor online sale, low speed high torque with 125cc/r displacement. It is a spool valve motor can be used in parallel or series, selectable flat key shaft or splined shaft, mounting flanges of 2 bolts and 4 bolts.
Description
hydraulic orbital motor with high performance shaft, can bear high pressure, high speed and high radial force. Mounting flanges of 2 bolts and 4 bolts, easy to install.
Specification
| Model | SCJ009558 | |
| Shaft Type (Optional) | Flat Key, Splined | |
| Flange Type (Optional) | 2 Bolts, 4 Bolts | |
| Displacement | 125 cc/rev (125 cm3/rev) | |
| Working Pressure | 15 MPa | |
| Flow | Continuous | 57 LPM |
| Intermittent | 68 LPM | |
| Max.Speed | Continuous | 452 rpm |
| Intermittent | 544 rpm | |
| Pressure | Continuous | 124 ∆Bar |
| Intermittent | 138 ∆Bar | |
| Torque | Continuous | 194 Nm |
| Intermittent | 216 Nm | |
| Weight | 7.5kg | |
Note:
- A simultaneous maximum torque and maximum speed is not recommended.
- ∆Bar refers to true pressure difference between inlet port and outlet port.
- Continuous Rating means that the motor may be run continuously at these ratings.
- Intermittent operation refers to that the motor running time must not exceed 10% per minute under this condition.
*To assure best orbital motor life, run it for approximately one hour at 30% of rated pressure before application to full load. Be sure this motor is filled with fluid prior to any load applications.
Dimensions (Unit: mm)
L1=154mm
Hydraulic Orbital Motor Shaft (Unit: mm)
Flange Types (Unit: mm)
L=160mm
Details
Tips: Main features of hydraulic orbital motors
- The hydraulic orbital motor adopts end face flow distribution and axial face flow distribution. Its structure is simple and compact, and the flow distribution accuracy is high.
- The hydraulic orbit motor adopts toothed stator and rotor pair, high mechanical efficiency, long service life under high pressure.
- It adopts double-joint angular ball bearings, which can bear larger radial and axial loads, with low friction and high mechanical efficiency.
- The advanced flow distribution mechanism design has the characteristics of high flow distribution accuracy and automatic wear compensation.
- These motors are allowed to be used in series and in parallel, and the external drain port should be connected when used in series.
- The tapered roller bearing support design has a large radial load capacity, so that the motor can directly drive the working mechanism.
- It has a variety of installation and connection forms such as flanges, output shafts, and oil ports.
