Mini Portable Hand-held CO2 Laser Power Meter Measure Laser Tube Power

Usage:

1) Put power meter to testing area immediately after press the start button, and then waiting for the measurement.
2) The first sound means that measuring started; please continue to keep the smooth target surface during testing.
3) The second sound means measuring achieved. Please remove power meter immediately, do not stay for a long time.
4) The third sound means system power off automatically.
5) If after a long warning tone, the display shows"888.8", it means that the machine is breakdown, you could contact with the supplier, do not dismounting the machine arbitrarily.
* If the display shows "000.0", it means the temperature of the surface is too high or it is out of the measuring range. You can use the machine again after the temperature down.

Fast and Accurate Measure the Glass CO2 Laser Tube Power

Laser Power Meter consists of a display and a detector. The Laser Power Meters has been calibrated at a given wavelength before shipping.
Laser Power Meter using the amount of heat absorption measurement principle, thermal sensor measure the scope is very wide in spectral width and power, very high spatial uniformity, Without spot size, spot location or spot uneven impact. Can measure continuous wave laser output power; pulse repetition rate can also measure the average laser output power.

Small, easy portable Convenient to use with inset power supply Easy to read, high accuracy

Product details

Small, easy portable. Convenient to use with inset power supply. Easy to read, high accuracy.

To achieve better accuracy, the sensor area is decreased in the upgrade

Status instruction codes are added

For a convenient replacement of battery.

Another screw hold(M4) is added to attach to holder that further

decrease the deviation caused by crooked position while in operation.