- Stock: In Stock
- Model: SCJ009686
- SKU: SCJ009686
Ask a Question About This Product
- Description
Socoje 10mm Rotary Pneumatic Cylinder, Vane Type 1pc
Brief
Description
Rotary vane cylinder with magnetic switch, available in 10mm or 15mm bore size, single vane cylinder with 90°, 180° or 270° rotation angle. Rotating pneumatic cylinder piston rod is made of stainless steel with high hardness, wear resistance and long service life.
Specification
| Model | SCJ009686 | |
| Bore Size | 10mm | 15mm |
| Swing Angle | 90°, 180°, 270° | |
| Fluid Used | Air (no oil) | |
| Pressure Resistance Test Pressure | 1.05MPa | |
| Ambient Temperature and Fluid Temperature | 5~ 60°C | |
| Maximum Operating Pressure | 0.7MPa | |
| Minimum Operating Pressure | 0.2MPa | 0.15MPa |
| Swing Time Adjustment Range （Note 1) | 0.03~0.3 s/90° | |
| Allowable Kinetic Energy (Note 2) | 0.00015J | 0.001J |
| 0.00025J | ||
| Allowable Radial Load | 15N | 15N |
| Allowable Axial Load | 10N | 10N |
| Vent Position | Main body side or axial | |
| Size of the Opening (Body Side, Axial Direction) | M3 | |
| Adjustable Angle Range of Components (Note 3) | 0~230° | 0~240° |
- Note 1: If the speed limit exceeds the upper limit (0.3s/90°), crawling or inactivity may occur, so it should be used within the adjustable speed range.
- Note 2: The upper part of the table shows the kinetic energy value when the pad cushion is used (for the swing end), and the lower part shows the kinetic energy value when the pad cushion is not used.
- Note 3: The adjustment range in the table is 270°.
Features
- Thickened base, strong impact resistance, making the rotary vane cylinder stable and compressive.
- The cylinder body of the rotary vane cylinder is thick, smooth and burr-free inside, with high-quality double sealing rings, the sealing performance is good, smooth and not stuck.
- The piston rod is made of stainless steel fine grinding, which is strong and hard, wear-resistant and air-leakage-proof.
- High-strength cap end, strong impact resistance, improve the overall stability of the rotary vane cylinder, extend rotary cylinder life.
Dimension (Unit mm)
| Size | A | B | C | D | E (g7) | F (h9) | G1 | G2 | J | K | M | N | P |
| 10 | 29 | 15 | 8 | 14 | 4-0.004 -0.016 | 90-0.006 | 3 | 1 | 5 | 9 | 9.5 | 9.5 | 24 |
| 15 | 34 | 20 | 9 | 18 | 5-0.004-0.016 | 120-0.043 | 4 | 1.5 | 6 | 10 | 14 | 10 | 29 |
| 20 | 42 | 29 | 10 | 20 | 6-0.004 -0.016 | 140-0.043 | 4.5 | 1.5 | 7 | 10 | 20 | 13 | 36 |
| 30 | 50 | 40 | 13 | 22 | 8-0.004-0.016 | 160-0.043 | 5 | 2 | 8 | 12 | 26 | 14 | 43 |
| 40 | 63 | 45 | 15 | 30 | 10-0.004 -0.016 | 250-0.052 | 6.5 | 4.5 | 9 | 20 | 31 | 20 | 56 |
| Size | Q1 | Q2 | Q3 | R | S | T | V1 | V2 | W | X | Y |
| 10 | M3x0.5 Deep6 | 6 | / | M3x0.5 | 14 | 3.6 | 30 | 37 | 19.8 | 8.5 | 14.5 |
| 15 | M3x0.5 Deep10 | 6 | M3X0.5 Deep 5 | M3x0.5 | 19 | 7.6 | 39.5 | 47 | 21 | 11 | 17 |
| 20 | M4x0.7 Deep13.5 | 11 | M4X0.7 Deep 7.5 | M5x0.8 | 24.5 | 10.5 | 50.5 | 59 | 22 | 14 | 21 |
| 30 | M5x0.8 Deep18 | 16.5 | M5X0.8 Deep 10 | M5x0.8 | 34.5 | 14 | 64 | 75 | 24 | 15.5 | 25 |
| 40 | M5x0.8 Deep16 | 17.5 | M5X0.8 Deep 10 | M5x0.8 | 39.8 | 17 | 79.5 | 90 | 30 | 21 | 31.6 |
Tips: What is the difference between single and double vane rotary actuators?
In these actuators, the hub simply rotates between stops by using oil or air pressure to create movement at the output lever. Double-bladed actuators include two opposing blades which provide greater torque but very limited rotation compared to single-bladed actuators with a complete circular chamber.
In the single vane type, rotational movement is usually limited to 280 degrees. In the two-blade type, the movement is usually 90 or 100 degrees, with a much smaller range of rotation and twice the force of a single-blade configuration.
