High speed mechanical automatic steel coil roller feeder machine factory
from
$1,700.00
Ex Tax: $1,700.00
5 or more $1,000.00
- Stock: In Stock
- Model: SCJ006738
- SKU: SCJ006738
Products Sold: 0
Product Views: 94
Ask a Question About This Product
- Description
Product Description
Product Application
This mechanical roller feeder can clamp sheet metal and feed the sheet metal to press machine, for automatic stamping processing.
Main Features
1. Durative: many project continuous processing is available
2. High Speed: can reach 600 times per minute
3. Fargoing using: to different width and thickness material, only need to adjust feeder to match mold
4. Compact structure, economical using
5. Low malfunction, easy maintenance
6. Feeding precision: depend on revolution and feeding length, normal accuracy is 0.03mm,if guide pin is located, accuracy can reach 0.01mm
Model | Roller width (mm） | Feeding length (mm) | Material thickness (mm) | Feeding line height (mm) | Weight (kg) |
LH-105NS | 100 | 50 | 0-1.6 | 55-100 | 64 |
LH-205NS | 200 | 50 | 0-1.6 | 55-100 | 87 |
LH-255NS | 250 | 50 | 0-1.6 | 55-100 | 95 |
LH-305NS | 300 | 50 | 0-1.6 | 55-100 | 103 |
LH-405NS | 400 | 50 | 0-1.6 | 55-100 | 121 |
LH-505NS | 500 | 50 | 0-1.6 | 55-100 | 141 |
LH-605NS | 600 | 50 | 0-1.6 | 55-100 | 161 |
LH-138NS | 130 | 80 | 0-1.6 | 60-120 | 76 |
LH-1310NS | 130 | 100 | 0-3.5 | 70-140 | 142 |
LH-2010NS | 200 | 100 | 0-3.5 | 70-140 | 155 |
LH-1315NS | 130 | 150 | 0-3.5 | 70-140 | 143 |
LH-2015NS | 200 | 150 | 0-3.5 | 70-140 | 156 |
LH-5010NS | 500 | 150 | 0-3.5 | 70-140 | 220 |
LH-6015NS | 600 | 150 | 0-3.5 | 70-140 | 241 |
LH-1320NS | 130 | 200 | 0-3.5 | 70-140 | 146 |
LH-2020NS | 200 | 200 | 0-3.5 | 70-140 | 159 |
LH-7020NS | 700 | 200 | 0-3.5 | 70-140 | 264 |
LH-7030NS | 700 | 300 | 0-3.5 | 100-190 | 363 |
Structures
The unitasis is assembled and all components are secured with high-strength screws. No welding parts, convenient for future repair and replacement of accessories, saving time and cost.
The left and right panels are made directly of liquid metal casting and are adaptable and can be used for a variety of alloy molding, flexibility is good.
The overall structure is compact, the occupied area is small, the installation is simple and convenient.
Straigjtening roller
1.Corrective wheel is made of solid bearing steel, medium frequency after thickening electroplating treatment, surface hardness is not lower than HRC58 ensures that the material is durable.
2.Applies GCr15 forge round steel , after preheating (globeded annealing), followed by grinding, milling, After medium frequency treatment, coarse grinding cold stabilization, then fine grinding, and finally electroplating.Maximum assurance Precision, concentricity, finish and hardness, extend the service life of the corrective roller.
· Eccentric disc
Applies casting iron, adaptable, flexible, not easy to break.
The cross joint is compactand, with NSK imported bearings and runs smoothly without a cadon.
The scale wire rod is made of high-strength material for smooth adjustment Eccentric disc with multiple scales as a whole for easy adjustment
Pull rod
The mid-section of the pull rod is processed with a seamless tube and the material is highly hard.Two ends of the wire rod with round steel by the lathe finishing, to ensure that the processed workpiece in the middle section fixed tube fit to ensure stability during operation.The pull rod installation is easy to collect blood, two-way with double nuts for fixing, to prevent the two ends of the wire rod in the use of Increased safety due to long-term jitter in the process
Detailed Images
