- Stock: In Stock
- Model: SCJ006882
- SKU: SCJ006882
Ask a Question About This Product
- Description
Product Application
1. This big machine combines uncoiler function, straightener function, NC servo roll feeder function together, so as 3 in 1.
2. It can decoil suitable metal sheet coil, then straighten the metal sheet, then feed the metal sheet to press machine automatically, for automatic stamping processing.
Main Features
1. Flexible operation：
All the functions of the feeder are centered on the PLC and a hand-held knob. The operator can implement all the motion functions of the equipment at one location. This can save time.
2. High efficiency, strong security：
To maximize the use of mechanical action instead of manual operation.Reduce unnecessary auxiliary time, improve work efficiency. Powerful auxiliary function, so that the operator can stay away from the uncoiler。
3. Easy to operate：
According to user needs, you can switch between the press or the device to control. Improve the equipment to adapt to the scope for the customer to save costs.
4. Area is reasonable：
Li Hao NCSF series is the powerful also have the most reasonable size in the industry, we can save space occupancy costs for the customers.
5. Control system compatibility：
NCSF series using a full set of Japan's Mitsubishi control system, and the standard system at home and abroad compatible, users do not need to worry about data conversion and other issues can be directly used to operate.
6. The design is harmonious and reasonable：
Li Hao’s NCSF series is the first on the industry to introduce industrial design into product. Li Hao and the most well-known industrial design cooperation, while ensuring the basic performance of equipment at the same time, maximize the visibility of the equipment to improve the operational comfort.
Basic parameters | ||||||
Name | Uncoiler, straightener, NC servo roll feeder, 3 in 1 （including hydraulic expansion, coil car） | |||||
Model | NCSF-400B | |||||
Width of the material | 50mm～400mm | |||||
Thickness of the material | 1.0mm～6.0mm | |||||
Straightening capacity (σs≤250MPa) | 400×2.8mm 400×3.2mm | 400×4.0mm 360×4.5mm | 290×5.0mm 200×6.0mm | |||
Inside coil diameter | Φ460mm～Φ530mm | |||||
Max.coil outside diameter | Φ1400mm | |||||
Max.coil weight | 5T | |||||
Straightening roll diameter | Φ88mm×7（up4/down3） | |||||
Material of straightening roll | GCr15（HRC58-62） | |||||
Feeding roll diameter | Φ120mm | |||||
Decoiler power | 2.2Kw | |||||
Straightening power | 5.5Kw | |||||
Feeding speed | 0～20m/min | |||||
Feeding precision | <±0.2mm | |||||
Other configuration | ||||||
Straightening adjustment type | Eccentric shaft adjust by worm and gear | |||||
Load material type | coil car | |||||
Feed discharging line adjustment method | Electric | |||||
Press material for decoiling part | By pneumatic | |||||
Feeding guide arc drive mode | By hydraulic | |||||
Block arm drive mode | Manual | |||||
Front block arm opening and closing method | Pneumatic | |||||
Feeding device movement mode | Two-way screw hands | |||||
Head of material flattening device | Hydraulic | |||||
Operation control mode | Main control cabinet + action unit remote control switch | |||||
Tail of material detector | Exist | |||||
Purchased parts brand | ||||||
Main bearing | HRB,ZWZ | |||||
Servo motor | Japan YASKAWA（SGMGH） | |||||
Man-machine interface | Taiwan WEINVIEW（Colored） | |||||
Common motor | Taiwan Wanxin | |||||
Frequency changer | Taiwan DELTA | |||||
Pneumatic unit | Taiwan Airtac | |||||
PLC | Japan Mitsubishi | |||||
Relay | Japan Omron | |||||
Hydraulic fittings | Beijing HUADE | |||||
Other technical data | ||||||
Pneumatic pressure | 0.5Mpa | |||||
Hydraulic pressure | 7Mpa | |||||
voltage | 3phase 380V | |||||
Feeding line height | 1050mm-1250mm | |||||
Input material type | From down to up | |||||
Standard direction | From left to right | |||||
Equipment length(Not included outlet shelf) | ≈4.5m | |||||
3 In 1 Feeder
Round mandrel of uncoiler
Ruler at plate of mandrel, can indicate width of coil material.
..., 400, 300, 200, 100, 0 | 0, 100, 200, 300, 400, ...
User can put coil material at center line position of this machine very easiliy.
Retainers of uncoiler, can keep coil material at center line position.
Guiding device for straigntener and feeder
While uncoiler decoil coil material, so material can get into entrance of feeder easily.
Guiding device, let material at center line position.
Good design, safe and easy to use.
HMI controller
Touch screen and buttons.
User touch numbers and input feeding length numbers.
User touch order menu for the machine.
Dial gauge for straightener
Straightener has upper staightening rollers and lower straightening rollers.
As per various thickness of coil material, user need to adjust distance between upper rollers and lower rollers.
With the dial gauge, user can adjsut distance easily.
Pedestal
Pedestal height is customized for you.
Feeding line height is adjustable.
