- Stock: In Stock
- Model: SCJ009645
- SKU: SCJ009645
- UPC: 315972717666
Ask a Question About This Product
- Description
Brief
Description
70 MHz portable digital storage oscilloscope with 250 MSa/s sample rate, 2 channel and 10mV/div~10V/div vertical sensitivity. The digital oscilloscope with an ultra-thin body and handle design, is lightweight and portable, user-friendly operation interface, a built-in temperature-controlled fan on the back to ensure fast cooling during prolonged use.
Specification
Performance Characteristics
| Model | SCJ009645 |
| Bandwidth | 40MHz |
| Channel | 2 channel |
| Sample rate | 250 MSa/s |
| Acquisition model | Sample, Peak detect |
| Record length | 6K |
| Display | 3.5 inch LCD |
| Waveform refresh rate | 10000 wfrms/s |
| Input coupling | DC, AC, Ground |
| Input impedance | 1 MΩ±2%, in parallel with 16 pF±10 pF |
| Probe attenuation | 1X,10X,100X,1000X |
| Max. input voltage | 400V (DC+AC, PK - PK) |
| Bandwidth limit(typical) | 20MHz / Full bandwidth |
| Sampling rate range | 2ns/div - 1000s/div, step by 1- 2- 5 |
| Sensitivity Resolution | 10mV/div~10V/div |
| Low Frequency（-3db） | ≥10 Hz (at input, AC coupling) |
| Rise time (at input, Typical) | ≤8ns |
| Trigger type | Edge |
| Trigger model | Auto, Normal, single |
| Trigger level range | ±4 div from the screen center |
| Automatic measurement | Period, Frequency, Mean, PK-PK, Max, Min |
| Cursor measurement | ΔV, ΔT, ΔT&ΔV between cursors,auto cursor |
| Communication interface | USB Type-C |
Digital Multimeter Specification
| Full-scale reading | 4.5 digitals (max 20000 count) |
| Testing Modes | Voltage, Current, Resistance, Capacitance, Diode, Continuity |
| Maximum Input Voltage | AC 750V, DC 1000V |
| Maximum Input Current | DC: 10A, AC: 10A |
| Diodes Test | 0-2V |
Accessories
- Quick Guide
- USB Cable
- Probe
- Probe Adjust
- Multimeter
- Lead
- BNC plug to alligator clips cable
- Soft Bag
Dimension (mm)
Tips: How does a handheld oscilloscope work?
Simply put, an oscilloscope is an electronic device that is widely used in the field of measurement. This oscilloscope can be used to measure electrical wave signals that cannot be seen by the human eye, and then transform these vapors into visible images that are presented on the instrumentation so that people can take the next step in their research with the help of images. Oscilloscope in the work, the use of something called an electron beam hit the screen, the screen because there is fluorescent material, so it will produce a lot of fine points, which people can see with their eyes. People use the oscilloscope can detect various signals in time back a change in characteristics, through the drawing of a good waveform line to study.
Any jump edge in the signal captured by the portable oscilloscope will act as a trigger event and start a new waveform acquisition process, which is especially useful when acquiring an eye diagram from a digital data stream, or when used with a signal that occurs only once.
