200W 3-Phase AC Gear Motor, Horizontal, Ratio 3~100
from
$505.69
Ex Tax: $505.69
- Stock: In Stock
- Model: SCJ009241
- SKU: SCJ009241
Products Sold: 0
Product Views: 496
Ask a Question About This Product
- Description
200W 3-Phase AC Gear Motor, Horizontal, Ratio 3~100
Brief
Buy 3-phase AC gear motor. Rated power 200W, power supply 110V/220V/380V at 3-phase or single phase, optional gear ratio 3:1~100:1, output torque 0.31-11.5 kg.m, output shaft diameter 18mm/22mm/28mm, horizontal/vertical installation. Matched with brake to control speed better.
Description
Low rpm 3-phase AC motor adds reduction gearbox working at 200W power. Gear ratios 3:1 to 100:1 to choose, corresponding speed rpm value 465~15, horizontal or vertical mounting direction. A brake is recommended to be used with the electric geared motor, for stopping machine safely.
Basic Specification
| Model | SCJ009241（(Ratio:3~10) , SOCOJE-CH22-200（(Ratio:15~90), SOCOJE-CH28-200（(Ratio:100~200) |
| Rated Power | 200W |
| Rated Voltage | Single-phase 110V, 50/60Hz Single-phase 220V, 50/60Hz 3-phase 220V, 50/60Hz 3-phase 380-415V, 50/60Hz |
| Gear Ratio | 3:1/ 5:1/ 10:1/ 15:1/ 20:1/ 25:1/ 30:1/ 40:1/ 45:1/ 50:1/ 60:1/ 70:1/ 80:1/ 90:1/ 100:1 |
| Working Efficiency | 75% |
| Insulation Grade | Class B, Class F can be customized |
| Protection Grade | IP54 |
| Duty | Continuous running |
| Working Environment | Temperature 10℃~+40℃ Humidity ≤90% |
| Pole | 4P (6P) |
| Working Height | ≤1000m |
| Standard | GB755/IEC-60034 |
 Download Attachments |
Terminal Box Direction (From Output Shaft)
AC Gear Motor Standard Installation
- All the SOCOJE 3-phase AC gear motors are suitable for this installation method, as shown in the following diagram.
- In the diagram, Q1, Q4, Q7, Q8 are the standard types of oil hole direction. If you need the air hole be on a special position, please contact us to modify the air hole direction.
- In actual use, it is recommended to pull out the oil plug in the air hole to balance the pressure in gearbox.
Details
Tips: How to calculate torque for 3-phase AC gear motor?
After calculating the gear ratio, convert the torque using the conditions of the machine used.
- First, calculate the torque of the conveyor pulley (T1)
T1 = (μ × load × roller radius) ÷ η1 - Convert the result into the torque required by AC gear motor output shaft (T2)
T2 = (T1 × sprocket reduction ratio) ÷ η2
Calculation example
- T1 = μ × W (D/2) ÷ η1
= 0.15 × 600 × (0.2/2) ÷ 0.95 = 9.5kgf-m - T2 = (T1 × 1/2) ÷ η2
= (9.5 × 1/2) ÷ 0.9 = 5.28kgf-m
