- Stock: In Stock
- Model: SCJ009272
- SKU: SCJ009272
Ask a Question About This Product
- Description
50 W Brushless DC Gear Motor, 3000 rpm, 12V/24V
Brief
Description
SOCOJE good quality DC gear motor is available in 12V, 24V DC voltage, up to 50 watt power, provides high torque at low speed. The DC brushless motor has rated speed of 3000 rpm and rated torque of 0.16 Nm, the 60 mm gearbox has a peak torque of 3 Nm.
50W DC gear motor specifications
| Model | SCJ009272 | SOCOJED2BLD50-24 |
| Power | 50W | |
| Weight | 2.0 Kg | |
| Voltage | 12V | 24V |
| Rated Speed | 3000 rpm | 3000 rpm |
| No-load Speed | 3300 rpm | 3300 rpm |
| Rated Current | 5.21A | 2.6A |
| Rated Torque | 0.16 N.m | 0.18 N.m |
| Peak Torque | 0.48 N.m | 0.48 N.m |
| No-load Current | < 0.8A | < 0.4A |
| Compatible Driver Model | BLD-300B (Click it to the product page) | BLD-120A (Click it to the product page) |
| Protection Grade | IP54 | |
| Motor Lead Length | 300mm | |
| Temperature | 0~50℃ | |
| Gearbox Model | 2GN□K, Enter the gear ratio into the box (□) within the model name | |
| Gear Ratio | 3, 5, 7.5, 10, 12.5, 15, 18, 20, 25, 30, 36, 40, 50, 60, 75, 90, 100, 120, 150, 180, 200 | |
Note: Motor length, power, voltage and speed can be customized according to your requirements under the allowed circumstance of adoptable dimension.
The allowable torque with a gearbox
| Gear Ratio | 3 | 5 | 7.5 | 10 | 12.5 | 15 | 18 | 20 | 25 | 30 | 36 | 40 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 | 200 |
| Speed (r/min) | 1000 | 600 | 400 | 300 | 240 | 200 | 167 | 150 | 120 | 100 | 83.33 | 75 | 60 | 50 | 40 | 33 | 30 | 25 | 20 | 17 | 15 |
| Allowable Torque (N.m) | 0.39 | 0.64 | 0.97 | 1.29 | 1.61 | 1.93 | 2.32 | 2.32 | 2.9 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 |
| Allowable Torque (kgf.cm) | 3.86 | 6.44 | 9.66 | 12.88 | 16.1 | 19.32 | 23.18 | 23.21 | 29.02 | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 30 |
Note:
- The values colored "Red" indicate that the gearbox and the DC motor are running in the same direction, and the other values are in the opposite direction.
- When it is desired to reduce the speed further than the gear ratio in the table above, an intermediate speed reducer with a gear ratio of 10 can be installed between the motor and the gearbox.
Wiring Definition
Dimension (Unit: mm)
50W DC Motor Dimension:
Gearbox Dimension:
L1=41.5mm
Details
Tips: How to install and operate the gear motor?
Installation and operation of the machine contains a certain risk, then what should we pay attention to when installing and operating the gear motor?
- The gear motor should be protected from shock during the installation process. When installing parts on the output shaft of the gear motor, it’s not allowed to knock or press directly on the output shaft.
- The wires shall be straight rather than curved, so as to avoid the poor conductivity in the gear motor.
- It’s not allowed to rotate the gear box forcefully from the output shaft, otherwise the gears may be damaged. When fixing transmission structures on the output shaft of the gear motor with binders, the bearing can not be pasted. When installing a circular gear motor or planetary gear motor, the length of mounting screw shall be controlled, over length screw may damage the parts in the gear motor.
