5.5 kW Water Cooled CNC Spindle Motor 24000 rpm ER25

5.5 kW water cooled CNC spindle motor for sale at affordable price, 24000 rpm speed, 2.38 Nm torque, 400Hz frequency, 3 phase 220V/380V AC operating voltage, ER25 (φ3.175 mm - φ16 mm) collet.

Feature

• Spindle motor with superior durability ER25 collet ensures smooth running.
• Fast response, strong overload capacity, low noise and high mechanical precision.
• High quality 4 pcs bearings (7007Cx2 + 7005Cx2), runout off less than 0.01mm, tapered bore less than 0.005mm.
• P4 grade ceramic ball bearings used as spindle bearing, which improves the service life under high speed revolution.
• Lubricated with grease, which is resistant to 200 degrees high temperature.
• Tight sealing and two-layer dustproof design.

Application

This series water cooled electric spindle motors mainly match with variable frequency drives or engraving machines, CNC router machine, and used for high speed profiling, drilling, cutting, engraving and groove milling of wood, metal, plastics, foam, rubber and other materials.

Note: The spindle motor and VFD shall be suitable with each other. The specifications and parameter settings of the VFD shall match the nominal parameters of the spindle motor. Otherwise, it will burn the spindle motor if the settings are not correct.

Specification

Model	STZ125-5.5-ER25
Matched VFD Model	GK3000-4T0075G (10 hp three phase VFD) GK3000-CS0075G (10 hp 1-phase 220V to 3-phase 380V VFD)
Power	5.5 kW
Diameter	φ125 mm
Phase	Three phase
Speed	24000 rpm
Voltage	3-phase 380V±10% AC
Current	14.5A
Frequency	400Hz
Torque	2.91 Nm
Number of Pole	2 poles
Cooling Type	Water-cooled
Installation Method	Horizontally or Vertically (When the motor is installed, the radial runout standard is required to be within 5um, and the chuck is generally 10um-15um.)
Lubrication	Grease
Thermal Class	Class F
Protection Class	IP50
Certification	CE
Warranty	Bearings for half a year, other parts for one year
Joint of Nose	ER25 (φ3.175 mm - φ16 mm)
Bearings Type	7007C P4*2 & 7005C P4*2
Application	Woodworking & Plastic
Weight	23 kg
Download Attachments	5.5 kW Water Cooled Spindle Motor CAD Drawings

Details

Tips: When Does Spindle Motor Bearing Need to be Replaced?

In mechanical equipment, the components of high-speed spindle motors will inevitably cause serious wear under long-term working conditions. In particular, there are many bearing parts inside the motor. Under the action of running friction, some bearings with poor tolerance are prone to failure. The bearings in the spindle motor play a very critical role. Whether it is transmission, connection, or load-bearing, they all need to rely on bearings. If the bearing in the spindle motor is damaged and there is no way to continue using it, it needs to be replaced. When do the bearings of the spindle motor need to be replaced?

1. When there are obvious cracks and gaps in the inner and outer rings of the spindle motor bearing or the bracket part, they need to be replaced in time. If it is a rolling bearing, it must be replaced when the rolling element cracks.
2. When the rolling or sliding track of the spindle motor has obvious wear damage, pay attention to replace it. Some spindle motor bearings have rivets fixed on them. Loose rivets mean that new motor bearings must be replaced.
3. If the bearing is rusted due to exposure to the air, it should be replaced in time. Sometimes the high temperature causes burn marks on the surface of the motor bearing to be replaced.
4. When the spindle motor bearing has creep and plastic deformation, it means that the motor bearing cannot be used because of wear or high temperature, and new bearing parts need to be replaced.