1.8 kW CNC ATC Spindle, 60000 rpm
from
$1,838.46
Ex Tax: $1,838.46
- Stock: In Stock
- Model: SCJ009536
- SKU: SCJ009536
Products Sold: 0
Product Views: 453
Ask a Question About This Product
- Description
1.8 kW CNC ATC Spindle, 60000 rpm
Brief
Get a 1.8kW ATC spindle motor at, three phase 220V AC rated voltage, 60000rpm speed, torque 0.28 Nm, 1000Hz, spindle tool changer with Φ3- Φ6 collet, low noise, high precision and long life, improves work efficiency, supplies for CNC router machines.
Description
Low cost water cooled ATC spindle with 1800 watt, 60000 rpm high speed, 0.28 Nm torque, Φ3- Φ6 collet, 3 phase 220V AC at high frequency 1000Hz, matched with VFD, works for CNC router machine.
Features
- Reasonable structure design, simple and compact configuration, easy to take apart.
- High precision, inflexibility and efficiency, long operation life.
- With high grade size, shape, position precision, and quality of the surface.
- Enough abrasive resistance, vibration resistance, suitable size.
- Work stable, low noise, enough fatigue strength.
Specifications
| Model | SCJ009536 |
| Motor power | 1800 W |
| Rated voltage | 200V AC |
| Phase | Three phase |
| Max speed | 60000 rpm |
| Max current | 10 A |
| Max frequency | 1000 Hz |
| Torque | 0.28 N·M |
| Cone at the end of the shaft pulsates | ≤0.001 mm |
| Tooling releasing air pressure | 5.6-6.0 Kgf/cm² |
| Tooling change method | Automatic tool changer |
| Tooling pulling force | ≥1200 N |
| Tooling back air pressure | No |
| Tooling connection | Φ3- Φ6 collet |
| Cooling | Water cooling |
| Encoder | No |
| Coolant pressure | ≥2.5 Kgf/cm² |
| Approach switch | No |
| Bearing lubrication method | Grease |
| Balance level | G1 |
| Install method | Clamp |
| Vibration Value | ≤0.8 mm/s |
| Weight | 3.97 Kg |
Note: The spindle motor and VFD shall be suitable with each other. The specifications and parameter settings of the VFD shall match the nominal parameters of the spindle motor. Otherwise, it will burn the spindle motor if the settings are not correct.
Dimension (Unit: mm)
Details
Tips: Tips For Using an ATC Spindle
- The cleaning, maintenance and maintenance of the ATC spindle must be carried out after the power is cut off and the work has completely stopped.
- The automatic tool change spindle must be equipped with a safety protection device on the machine.
- Do not let your arm touch the rotating part of the ATC spindle during the high-speed rotation of the ATC spindle.
- The operator of the ATC spindle should not wear loose or sagging clothing, women must tie their long hair
- Please use the tool holder designated by the spindle.
- The ATC spindle needs to be maintained regularly in accordance with the manual, otherwise it may cause mechanical failure and damage, and shorten the service life of the ATC spindle.
