Nema 23 Bipolar Stepper Motor, 2A, 1.8 degree, 4 wires
from
$63.31
Ex Tax: $63.31
- Stock: In Stock
- Model: SCJ009407
- SKU: SCJ009407
Products Sold: 0
Product Views: 412
Ask a Question About This Product
- Description
Nema 23 Bipolar Stepper Motor, 2A, 1.8 degree, 4 wires
Brief
and high quality Nema 23 bipolar stepper motor, phase current 2A and resistance 1Ω, 0.5Nm holding torque, 1.8 deg. step angle (200 steps/rev), body in 41mm.
Description
Nema 23 bipolar Stepper motor, 0.5Nm in 41mm, 1.8 degree, 2 phase 4 wires.
Specification
| Electrical Specification | Model | SOCOJE57HS41-2004 |
| Matched Driver Model | SCJ009407(Click it to see more info) | |
| Step Angle | 1.8° | |
| Holding Torque | 0.5Nm | |
| Rated Current/phase | 2A | |
| Phase Resistance | 1Ω | |
| Inductance | 2.2mH | |
| Rotor Inertia | 120g-cm2 | |
| Physical Specification | Frame Size | 57 x 57mm |
| Length | 41mm | |
| Shaft Diameter | Φ8mm | |
| Shaft Length | 19mm | |
| Motor Leads | 4 | |
| Weight | 0.45kg | |
| Technical Parameters | Step Angle Accuracy | ±5% (full step, no load) |
| Resistance Accuracy | ±10% | |
| Inductance Accuracy | ±20% | |
| Temperature Rise | 80℃ Max. (rated current, 2 phase on) | |
| Ambient Temperature | -20℃~+50℃ | |
| Insulation Resistance | 100MΩ Min. 500VDC | |
| Dielectric Strength | 500V AC for one minute | |
| Shaft Radial Play | 0.02Max. 450g | |
| Shaft Axial Play | 0.08Max. 450g | |
| Quality Assurance | Warranty Period | 12 months |
| Certificate | CE, ROHs, ISO/SGS9001 |
Dimensions: (Unit=mm)
L Max=41mm, Shaft Length=L1-1.6mm, L1(Common)=20.6mm
Wiring Diagram
Tips: Three factors should be paid attention to in selection of the stepper motor
- Stepping angle
it is necessary to select the stepping angle of stepper motor according to the requirements of load precision. The least resolution ratio of the load is generally converted to the motor shaft, pay attention to the angle for each resolution ratio and the stepping angle of stepper motor should be equal to or smaller than the angle. - Static torque
Select the static torque according to the load of stepper motor while load can be divided into inertia and friction load. When directly starting the stepper motor (generally from the low to high velocity), the considerations into the two kinds of load are given. When starting the motor at acceleration, give considerations into the inertia load; when the motor rotates at constant velocity, only give considerations into the friction load. Generally, the static torque shall be within 2-3 times of the friction load. - Current
As for the stepper motors with the same static torque, there is great difference in their motion characteristics due to the difference in current parameters. The current of stepper motor can be judged according to the torque frequency characteristic curve diagram.
