Nema 23 Stepper Motor, 4.2A, 1.8 degree, 2 phase 4 wires
from
$88.08
Ex Tax: $88.08
- Stock: In Stock
- Model: SCJ009438
- SKU: SCJ009438
Products Sold: 0
Product Views: 474
Ask a Question About This Product
- Description
Nema 23 Stepper Motor, 4.2A, 1.8 degree, 2 phase 4 wires
Brief
Favorable price Nema 23 stepper motor, 3.0Nm holding torque, 4.2A phase current, 1.8 deg. step angle(200 steps/revolution), high quality and manufacturer direct sale.
Description
Nema 23 Stepper motor, 3.0Nm in 111mm, 1.8 degree.
Specification
| Electrical Specification | Model | SOCOJE57STH111-4004 |
| Matched Driver Model | SCJ009438(Click it to see more info) | |
| Step Angle | 1.8° | |
| Holding Torque | 3.0Nm | |
| Rated Current/phase | 4.2A | |
| Phase Resistance | 0.9Ω | |
| Inductance | 3.8mH | |
| Rotor Inertia | 800g-cm2 | |
| Physical Specification | Frame Size | 57 x 57mm |
| Length | 111mm | |
| Shaft Diameter | Φ6.35mm | |
| Shaft Length | 19mm | |
| Motor Leads | 4 | |
| Weight | 1.4kg | |
| Technical Parameters | Step Angle Accuracy | ±5% (full step, no load) |
| Resistance Accuracy | ±10% | |
| Inductance Accuracy | ±20% | |
| Temperature Rise | 80℃ Max. (rated current, 2 phase on) | |
| Ambient Temperature | -20℃~+50℃ | |
| Insulation Resistance | 100MΩ Min. 500VDC | |
| Dielectric Strength | 500V AC for one minute | |
| Shaft Radial Play | 0.02Max. 450g | |
| Shaft Axial Play | 0.08Max. 450g | |
| Quality Assurance | Warranty Period | 12 months |
| Certificate | CE, ROHs, ISO/SGS9001 |
Dimensions: (Unit=mm)
L Max=111mm
Wiring Diagram
Tips: Solutions to interference of stepper motor
- Install power filter to reduce the contamination of AC power.
- Based on the principle of “single-point-earthing”, connect all the following earthing lines or something else to the earthing rod on wall of chassis, including grounding wire of power filter and stepper driver PE (the baseboard of driver and chassis should be insulated.), control pulse and direction pulse DIR-outgoing lines of short circuit, motor earthing line, cable protecting cover between driver and motor and shielded wire of driver, and good contact should be realized.
- Lengthen the distance between control line, power line (L and N) and motor drive line (U, V and W) to avoid crossing. For example, when dealing with the driver installation site of two drivers of the same chassis in the double-shaft system, put the nameplate of one driver forward and that of the other backward, and shorten the leads as far as possible when making structural arrangement.
- Reduce the external interference in power line with the shielded line or the interference of power line in external world.