Hydraulic Orbital Motor 395cc/rev 15MPa 2 Bolts 4 Bolts

Favorable price hydraulic orbital motor is design of disc distribution flow, which can provide improved performance at low speed higher volumetric for the automatically compensate wear. It can be used on heavy vehicles and machinery in traction drive applications.

Specification

Note:

• A simultaneous maximum torque and maximum speed is not recommended.
• ∆Bar refers to true pressure difference between inlet port and outlet port.
• Continuous Rating means that the motor may be run continuously at these ratings.
• Intermittent operation refers to that the motor running time must not exceed 10% per minute under this condition.

*To assure best orbital motor life, run it for approximately one hour at 30% of rated pressure before application to full load. Be sure this motor is filled with fluid prior to any load applications.

Dimensions (Unit: mm)

L1=203mm

Hydraulic Orbital Motor Shaft (Unit: mm)

Flange Types (Unit: mm)

L=210mm

Details

Tips: Difference between hydraulic orbital motor and gear motor

Hydraulic orbital motors and gear motors are different in appearance, size, torque, connection mode, application places, etc., but the functions are the same, they are all for speed change, and sometimes they can be interchanged. Orbital is a form of reducer, as is gear. That is, the orbit motor has a compact appearance, small size, and a gear motor with high load resistance and durability.