- Stock: In Stock
- Model: SCJ009330
- SKU: SCJ009330
Ask a Question About This Product
- Description
Nema 14 Stepper Motor Linear Actuator, 2 phase, 10V, 0.5A
Brief
Description
The 0.5A 10V Nema 14 stepper motor linear actuator is ideal for applications requiring a combination of precise positioning, rapid motion and long life. Typical applications include X-Y tables, medical equipment, semiconductor handling, telecommunications equipment, valve control, and numerous other uses.
Stepper Motor Linear Actuator Specification
| Model Type | External Shaft | Non-Captive Shaft |
| 35H28-0504AST | 35H28-0504GTS | |
| Weight | 3 kg | |
| Length | 28 mm | |
| Phase | 2 phase | |
| Step Angle | 1.8° | |
| Rated Voltage | 10 V | |
| Rated Current | 0.5 A | |
| Resistance | 20 Ω | |
| Holding Torque | 14 Oz-in | |
| Number of Leads | 4 | |
| Rotor Inertia | 10 g-cm2 | |
Select Leadscrew
Choose your stepper motor linear actuator screw from one of the available options:
| Screw Diameter | Lead | Travel Per 1.8 Step | |||
| (in) | (mm) | (in/rev) | (mm/rev) | (in/step) | (mm/step) |
| 0.315 | 8 | 0.079 | 2 | 0.00039 | 0.01 |
| 0.315 | 8 | 0.157 | 4 | 0.00079 | 0.02 |
| 0.315 | 8 | 0.315 | 8 | 0.00157 | 0.04 |
| Note: Screw of 8mm diameter is made of copper. | |||||
Stepper Motor Linear Actuator Dimension (Unit=mm)
1. Non-captive shaft style
L=28mm
2. External shaft style
L=28mm
Details
Tips: Detection and maintenance of screw rod support bearing clearance
If the dial-gage indicator which measures the screw rod does not swing when the screw rod moves in forward direction and opposite direction, it shows that the screw rod does not move. The maximum and minimum measured value difference is the distance of the axial float of the screw rod. At this point, we will check whether the back cap of the supporting bearing is locked, whether the bearing is worn out or not, and the pre load bearing washer is suitable. If the bearing is damaged, the bearing needs to be replaced and the pre-loaded washer needs to be made again so as to tighten the back cap. The screw rod axial float largely depend on the precision of supporting bearing preload washer. The most ideal condition of the screw rod installation accuracy is that there is no positive and negative clearance, and the support bearing should have the interference of about 0.02mm.
