6-wire Nema 23 Stepper Motor, 2 phase, 3A, 1.8 degree
from
$65.46
Ex Tax: $65.46
- Stock: In Stock
- Model: SCJ009398
- SKU: SCJ009398
Products Sold: 0
Product Views: 481
Ask a Question About This Product
- Description
6-wire Nema 23 Stepper Motor, 2 phase, 3A, 1.8 degree
Brief
Low cost Nema 23 hybrid stepper motor with 1.8 deg. step angle(200 steps/rev). Phase current 3A and holding torque 0.72Nm. 100% brand new and manufacturer direct sale.
Description
Nema 23 Hybrid Stepper Motor, 0.72Nm in 51mm, 1.8 degree.
Specification
| Electrical Specification | Model | SOCOJE-57STH51-3006 |
| Matched Driver Model | SCJ009398(Click it to see more info) | |
| Step Angle | 1.8° | |
| Holding Torque | 0.72Nm | |
| Rated Current/phase | 3A | |
| Phase Resistance | 0.74Ω | |
| Inductance | 0.9mH | |
| Rotor Inertia | 230g-cm2 | |
| Physical Specification | Frame Size | 57 x 57mm |
| Length | 51mm | |
| Shaft Diameter | Φ6.35mm | |
| Shaft Length | 19mm | |
| Motor Leads | 6 | |
| Weight | 0.59kg | |
| Technical Parameters | Step Angle Accuracy | ±5% (full step, no load) |
| Resistance Accuracy | ±10% | |
| Inductance Accuracy | ±20% | |
| Temperature Rise | 80℃ Max. (rated current, 2 phase on) | |
| Ambient Temperature | -20℃~+50℃ | |
| Insulation Resistance | 100MΩ Min. 500VDC | |
| Dielectric Strength | 500V AC for one minute | |
| Shaft Radial Play | 0.02Max. 450g | |
| Shaft Axial Play | 0.08Max. 450g | |
| Quality Assurance | Warranty Period | 12 months |
| Certificate | CE, ROHs, ISO/SGS9001 |
Nema 23 Stepper Motor Dimensions: (Unit=mm)
L Max=51mm
Nema 23 Stepper Motor Wiring Diagram
Tips: Precautions in the usage of stepper motor
- The stepper motor is applicable to the low-velocity occasion. That is, the rotational velocity per minute doesn’t exceed 1000 rotations. It’s better to use it within 150-450rpm, during which it can work through reducer. At this time, the working efficiency of the motor is high and noise is low.
- It’s better not to use the stepper motor at synchronizing state. When it is used at synchronizing state, the vibration is large.
- Except 12V for the motor with marked voltage of 12V, other voltage value of the motor is not the drive voltage value. The drive voltage can be selected according to the driver. Other drive power also can be used with voltage of 12V except 12V constant voltage drive, but it is necessary to give considerations into temperature rise.
- As for the load with large rotational inertia, it is necessary to choose motor with large chassis.
- At high velocity or large inertia load, the motor is not generally started at working speed, while the motor will rotate at acceleration gradually thus the out of step will not occur. Besides, the noise can be mitigated and positioning precision of stop can be improved.
