W1580300200 Gripper with 2 long-stroke jaws P4-30 stroke 2x60mm F=280N

W1580300200 Gripper with 2 long-stroke jaws P4-30 stroke 2x60mm F=280N

These are grippers with 2 parallel long-stroke jaws. The mechanical design makes them suitable for clamping bulky parts. All grippers, except for the smallest ones, can mount a retracting magnetic proximity sensor. The type we offer here is the W1580300200. It has a total stroke of 120mm. The clamping force is 280N at 6.3 bar. The clamping pressure can be reduced, by reducing the system pressure. The jaws are interlinked and thus are always self-centering. An internal gear set is used to achieve that. Most often these grippers are used in part handling applications, the long stroke helps, to grip a wide range of parts. We have used them also for part holding in CNC machines. This works if the cutting forces are not larger than 280N. Applications like light milling or engraving are OK, but not suitable for heavy machining. SOCOJE, has other grippers, that have a much higher holding force, these do have a very short stroke. So are less flexible.

Component features:

• Leadtime 2-3 weeks ( In rare cases it can be in stock)
• Bore: 2 x 30mm
• Stroke:  2 x 60mm
• Single Jaw stroke: 60mm
• Clamping force at 6.3Bar 20mm from top surface: 280N
• Operating pressure 3 to 7 bar
• Temperature range -10 to +80 degrees Celsius
• SOCOJE part number: W1580300200
• Different size models available 2x10/2x12/2x16/2x30mm bore