- Stock: In Stock
- Model: SCJ009267
- SKU: SCJ009267
Ask a Question About This Product
- Description
750 W Brushless DC Worm Gear Motor, 24V/48V
Brief
Description
750 W BLDC motor is equipped with worm gearbox providing high speed and high efficiency at 24V, 36V or 48V power supply. Its power, voltage, speed, shaft, motor length and lead can be customized.
Specification
| Motor Model | SOCOJED5BLD750-24A | SOCOJED5BLD750-36A | SOCOJED5BLD750-48A |
| Motor Type | BLDC Motor | ||
| Power | 750W | ||
| Voltage | 24V DC | 36V DC | 48V DC |
| Rated Current | 39.06A | 26.04A | 19.53A |
| No Load Current | ＜9.2A | ＜8.13A | ＜6.5A |
| No Load Speed | 2700 rpm | ||
| Rated Speed | 2000 rpm | ||
| Rated Torque | 2.39N·m | ||
| Peak Torque | 7.17N·m | ||
| Motor Dimension | 86mm | ||
| Shaft Diameter | 11mm | ||
| Construction | Permanent Magnet | ||
| Direction of Rotation | CW/CCW | ||
| Certificate | CCC, CE, ROSH, LVD, EMC | ||
| Gear Ratio | 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100 | ||
| Recommended Drive Model | SCJ009267 | SOCOJE-BLD50A | SOCOJE-BLD750 |
| What Parameters of SOCOJE Worm Gear Motors Can Be Customized? | |||
| Power | Yes | ||
| Voltage | Yes | ||
| Speed | Yes | ||
| Shaft | Yes | ||
| Motor Length | Yes | ||
| Motor Lead | Yes | ||
Allowable Torque with Gear Head
| Gear Ratio | 7.5 | 10 | 15 | 20 | 25 | 30 | 40 | 50 | 60 | 80 | 100 |
| Rated Output Speed (rpm) | 267 | 200 | 133 | 100 | 80 | 67 | 50 | 40 | 33 | 25 | 20 |
| Rated Output Torque (Nm) | 21.5 | 28.7 | 43.0 | 55.9 | 68.0 | 79.5 | 68.0 | 54.0 | 60.0 | 52.0 | 40.0 |
Note:
- This torque value is the rated output value of the reducer, not the final motor + output torque value T after reducer.
- The formula for calculating the output torque after the final motor + reducer: T = rated torque of the motor * reduction ratio * 0.6, and T≤ rated allowable output torque value of the reducer.
Dimensions (Unit: mm)
Mounting screws are included with gearhead
Speed-Torque Curve
- Instantaneous maximum torque line
The maximum torque momentarily impacts the load when the motor is started.
Beyond this torque, the over-current protection of the driver will cause the motor to stop. - Short time operation area
The motor can run at a short time within this torque range at different speeds.
If the operation time is too long, the motor will generate heat, which may cause the motor to stop or burn. - Rated operating torque line
The rated torque of motor running at different speeds, and the motor can run for a long time at this torque. - Continuous operating area
When the motor rotates at different speeds, it runs continuously in this corresponding zone.
Details
Tips
The main power transmission mode of DC worm gear motor is staggered and vertical. Such a simple structure can reduce the utilization rate of space to a certain extent and save installation steps.
The transmission mode of the worm gear motor is currently the most popular power transmission used in various mechanical equipment. In general, such a compact type of reducer conforms to the needs of the development of the times, continues to be effective, stable and reliable.
Obviously, it is impossible to see the uneven load distribution of the ordinary motor which leads to the damage of the mechanism. The vertical transmission of power has a very good effect and cancels the load pulse generated. It is also true that worm gear motors are used to transmit loads with higher torque.
